Hole 1 - Mini Golf

This is the 1st hole a Mini Golf course

This hole is designed:
· to be printed in one part (fits in diagonal 240x240 mmm).
· to be played with a single stroke.
· to be printed without supports.

I made three different intensities for the "teebox", start with the medium and see if you need harder or softer. You can also find two "ball" designs one for fff printers and another one for sla printers.

Printing tips:
1) The most important advice I can give you is to let the "teebox" cool down correctly when you print it. The part contains a spiral spring and if you don't let it cool the spring won't work.
2) NO SUPPORTS, with 0,2 layer height and 10-20% infill (you can also use other settings, those are the ones I used and they worked fine). It should take between 8-10h to print.
3) PLA not PET, there are a lot of overhangs in the designs so I don't recommend using PET.

If you like the design please leave a like and if you have any problem with the design, printing sett