Hole Calibration Model

Hole Calibration Model. Simple model to effectively test your slicers parameters for printing holes. Can also be printed vertical (place the long side on the build platform for more stability).A short print to calibrate your slicer settings to check if the slicer parameters are set correctly.Applicable for parts with critical dimensions, snap-to-fit models and other tolerance related parts.Use calipers to measure the hole sizes and adjust the parameters accordingly.Results vary per material and sometimes also per brand.Nozzle diameter has a strong effect on the results, so test accordingly.Affected most by:RetractionPrinting SpeedCoastingWipeMaterial Extrusion rate + Wall Extrusion rate.Horizontal Expansion