Honda VTX LED conversion brakets

This is bracket for Honda VTX headligh LED conversion. there is one on here already that i downloaded and printed but it was garbage, and did not worked or fit. so i made this one on fusion 360, with few tries it came out perfect. on bracket 1 part 1 u will need to readjust a holes with a dramel just few mm side to side. the bracket #2 is perfect and needs NO adjustment but u need to tap the side hole with a tread M5 0.9mm
i printed the bracket 1 with PC in black it is outside part and are visible from outside the housing so i printed with higher temp plastic and in black because i have installed black LED headlight. the Part #2 i printed in ABS + it turned out all very nice. i printed at quality of 0.25 on ABS+ speed 50 mm/s and with PC i printed also 0.25 layer high with 45mm/s speed. on part 2 i used a brim of 10mm and suport that are touching the built plate only so my side hole were clean of supports and it turned out well with a first print.
Injoy! thanks for lookig. and ple