Thingiverse
Honey Pi
por greenfish
70
Descargas
35
Likes
1
Makes
Did the HoneyPi Beehive Libra. (https://www.honey-pi.de/).
Housing in the pictures was glued with hot glue ... I edited it to screw it to the sheet metal.
Ordered a few things other than on the description of the homepage.
So my setup is a Pi Zero W, a HX711, a BME280 and the following things...
Took a libra for packets. Load cell is to wire like the one from banggood described on the honey pi homepage. (https://tinyurl.com/u2v6mf4)
The solarcell and pwm is this: https://www.amazon.de/dp/B07CGGTPTC/ref=as_li_ss_tl?&linkCode=sl1&tag=honeypi-21&linkId=601c1897acce83eb21af4fb3b9ca3844&language=de_DE
Batterie I was using this: https://www.amazon.de/dp/B07CGGTPTC/ref=as_li_ss_tl?&linkCode=sl1&tag=honeypi-21&linkId=601c1897acce83eb21af4fb3b9ca3844&language=de_DE mentioned it is too small. Will use this instead: https://www.amazon.de/dp/B07CGGTPTC/ref=as_li_ss_tl?&linkCode=sl1&tag=honeypi-21&linkId=601c1897acce83eb21af4fb3b9ca3844&language=de_DE
Then just 12 screws (M3) + 4
Housing in the pictures was glued with hot glue ... I edited it to screw it to the sheet metal.
Ordered a few things other than on the description of the homepage.
So my setup is a Pi Zero W, a HX711, a BME280 and the following things...
Took a libra for packets. Load cell is to wire like the one from banggood described on the honey pi homepage. (https://tinyurl.com/u2v6mf4)
The solarcell and pwm is this: https://www.amazon.de/dp/B07CGGTPTC/ref=as_li_ss_tl?&linkCode=sl1&tag=honeypi-21&linkId=601c1897acce83eb21af4fb3b9ca3844&language=de_DE
Batterie I was using this: https://www.amazon.de/dp/B07CGGTPTC/ref=as_li_ss_tl?&linkCode=sl1&tag=honeypi-21&linkId=601c1897acce83eb21af4fb3b9ca3844&language=de_DE mentioned it is too small. Will use this instead: https://www.amazon.de/dp/B07CGGTPTC/ref=as_li_ss_tl?&linkCode=sl1&tag=honeypi-21&linkId=601c1897acce83eb21af4fb3b9ca3844&language=de_DE
Then just 12 screws (M3) + 4
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!