Hook V2

This is a configurable coat hook! 👉 Please rate the print profiles and follow me if you like - It would help tremendously. 👈ConfigurationYou can configure the hook (Either by using the makerworld website “customizer button” or by using OpenSCAD and the customizing instructions here).Configurable are:The number of hooks and their distanceThe width of the hook, the hooks angle and tip radiusThe width of the corner the hook is attached to, the thickness of the cornerThe printing orientation (vertical or 45 degree)Pre-made STLHint: To get all versions as STL, use “Download STL” above.Print instructionsYou can print it without support. The printing orientationa single hook works "on the side" without support material / raft if you have good adhesion. If you have a Core-XY printer (like P1S X1S PrusaXL) then more hooks are fine."45 degrees" might need some support material and a raft, but is probably the only choice if you have more than 2 hooks