Hopping Hood

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA Default White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 5 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #7 (0.64mm) swap to Gray At layer #9 (0.8mm) swap to White At layer #22 (1.84mm) swap to Red for the rest.