Thingiverse
Horde Symbol
di Apex-3D
25
Download
28
Likes
0
Makes
-Printed with the Creality CR-10 @ 0.2mm Layer Height
-Top/Bottom Layers - 3 each
-Did not use any support
-Did not use any type of build plate adhesion
-Print speed was 60mm/s
-This model can be scaled as needed on any axis
-The model I printed was scaled down from 15mm on the Z-axis to 5mm with no adverse effects during printing.
-The infill was set at 10% but can be any desired amount.
-Print time was approximately 1h 20min
-Top/Bottom Layers - 3 each
-Did not use any support
-Did not use any type of build plate adhesion
-Print speed was 60mm/s
-This model can be scaled as needed on any axis
-The model I printed was scaled down from 15mm on the Z-axis to 5mm with no adverse effects during printing.
-The infill was set at 10% but can be any desired amount.
-Print time was approximately 1h 20min
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
