Horizontal PSU Mount

This design is not intended for beginners, if you choose to do this modification for dual z-axis, do so at your own risk.
It's a simple mount that attaches the Mean Well PSU to an extruded aluminum v-rail.
Stuff needed: PETG, Two M4 x10mm socket head screws, wire and connectors.

This likely requires additional changes for your build, wire extensions, crimp terminals, and forked terminals, and things like zip ties to make it tidy.

Bolt them to PSU with 1 M4 10mm hex screw on each mount with up arrow orientation as top of the mount, temporarily remove your crossmember to slide the mounted PSU into the v-channel. Then reassemble, zip it up, and you're done!