MakerWorld
Hueforge & Lithophane
Voir le modèle
Horses Hueforge
8
Téléchargements
10
Likes
4
Makes
This is a Hueforge of my wifes two horses. This is one of her favorite pictures of them and asked me to do a hueforge of it and it turned out amazing I think! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 115.37x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA Overture Black Transmission Distance: 0.7 PLA Overture Red Transmission Distance: 4.8 PLA Overture Yellow Transmission Distance: 9.7 PLA Overture White Transmission Distance: 4.4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #15 (1.28mm) swap to White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !