Hose Holder

Design Features:

Slide-In Mechanism:
Slim profile (8mm thickness) allows the holder to fit snugly between the wall and the faucet.

Clamp Assembly:
Uses three sets of M4 screws and nuts, with recessed holes for a flush finish.
Nuts can be seated securely using heat or pressure, but avoid hammering.

Compatibility:
Designed in DesignSpark Mechanical with customizable .rsdocx files available for further adjustments.

Dimensions:
Height: 294.67 mm (11.60 in)
Width: 127 mm (5 in)
Depth: 8 mm (0.31 in)

Durability:
Recommend using PLA for general use or stronger materials (e.g., PETG, ABS) for high-stress or outdoor conditions.

3D Printing Settings:
Printer: Snapmaker 2.0 A350T (compatible with other models that match the dimensions).
Nozzle Size: 0.4mm
Material: PLA (default) or stronger options (PETG, ABS).
Rafts: Recommended for adhesion.
Support: Yes

Infill:
100% for PLA for maximum strength.
Lower infill (e.g., 40–60%) acceptable with stronger materials.

Assembly Instructions:

Pre