Hosing Braces

Thanks for viewing!

This simple print is made to hold 10mm OD hosing in place, with a small Command™ strip on the flat face(s). I used it to feed hosing from my aquarium to my laundry room, between the wall and ceiling.

✔️ The 1-Sided Brace is meant for ceilings, or walls, where a corner is not available.

✔️ The 2-Sided Brace is meant for corners between walls and ceilings, or walls and the ground, or other structures.
Use the 2-sided brace wherever possible, as it provides two faces to add Command™ strips. One Command™ strip can be used on the 2-sided brace, by bending it across the two faces.

✔️ The "Dual" braces are meant for two lines running parallel, available in 1- and 2-sided versions.

✔️ The hosing required for these brackets is 10mm OD (outer diameter) PVC or airline hosing. Smaller outer diameters will work but will have some slack.

✔️ The braces can also be scaled larger/smaller in a 3D printing slicer in order to accommodate different size tubing.

E