Thingiverse
Hot Tub CnC Machine
di Kb9vjq
32
Download
19
Likes
0
Makes
This Router Machine can hold a flexible Dremel tool or A Foredom General-Purpose Flex Shaft Rotary Tool - H.44T . This allows for 1/4 inch or 6.25 mm router bits.
Quite a few parts get used in more than one place . Part 16 ,15 and 12 are good examples of how a parts duplicate is used across the machine. There are lots of less obvious examples as well parts 58 60 36 39 51 52 22 and 4 , are all redundant parts that get used in multiple places . I've built 2 Machines like this now and I have the assembly time down to around 15 hours . This is not including printing time just part post processing and assembly .
There is only a need for part 46 , 47 and 53 if you Have a Dremel flex shaft . If your going to use a Vevor Flex shaft Mill you don’t need to print them. Instead print 53.1 and a quantity of 2 of 46.1
The machine has 12 mm diameter rods for slides on the x and y axes.
I purchased a Befenybay 200mm 4080U Z-axis Screw Linear Actuator for the z axis from amazon.
Quite a few parts get used in more than one place . Part 16 ,15 and 12 are good examples of how a parts duplicate is used across the machine. There are lots of less obvious examples as well parts 58 60 36 39 51 52 22 and 4 , are all redundant parts that get used in multiple places . I've built 2 Machines like this now and I have the assembly time down to around 15 hours . This is not including printing time just part post processing and assembly .
There is only a need for part 46 , 47 and 53 if you Have a Dremel flex shaft . If your going to use a Vevor Flex shaft Mill you don’t need to print them. Instead print 53.1 and a quantity of 2 of 46.1
The machine has 12 mm diameter rods for slides on the x and y axes.
I purchased a Befenybay 200mm 4080U Z-axis Screw Linear Actuator for the z axis from amazon.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
