Hot wheels logo v2

Another version of Hot Wheels logo, with sharp edges. Negative parts added for magnets dim. 8x2 mm. You can move them around and scale them to your liking. The STL file can be divided into parts for easier coloring. Printing on textured plate:Use slightly higher nozzle and bed temperature for the first layer when printing to have fewer gaps between colorsPrint slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/sPrinting on smooth plate:Set initial layer height at 0.1 mm and initial layer width 0.3 mmUse slightly higher nozzle and bed temperature for the first layer when printing to have fewer gaps between colorsPrint slower for better quality, set initial layer and initial layer infill to 20 mm/s, outer wall, inner wall and top surface to 100 mm/sAdding holes for magnetsYou can easily add holes for magnets in the slicerRight-click on the objects and select Add negative part - cylinderScale the cylinder to t