MakerWorld
Signs & Logos
Go to Model
Hotwheels 68 logo
38
Downloads
30
Likes
14
Makes
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x87.81mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9 PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.8 PLA BambuLab Matte White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal Black At layer #16 (0.76mm) swap to Scarlett Red At layer #31 (1.36mm) swap to Mandarin Orange At layer #42 (1.8mm) swap to White for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
