Hotwheels lamborghini

by Mano's 3d_Art · Hueforge & Lithophane

11 Downloads

20 Likes

4 Makes

Please rate the prints, this really helps me, thank you Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 225x220.11mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 3.9 PLA Kexcelled Sky Blue Transmission Distance: 2.6 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #20 (1.68mm) swap to Sky Blue At layer #21 (1.76mm) swap to Yellow for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you and enjoy the print