MakerWorld
Signs & Logos
Zum Modell
Hotwheels sign
34
Downloads
25
Likes
8
Makes
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x142.86mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.9mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Orange Transmission Distance: 5.3 PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9This print uses 2 unique filamentsSwap Instructions: Start with Orange At layer #30 (1.32mm) swap to Scarlett Red for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
