MakerWorld
Signs & Logos
Vai al Modello
Hotwheels sign
67
Download
46
Likes
20
Makes
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x142.86mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9 PLA BambuLab Matte White Transmission Distance: 3.5This print uses 2 unique filamentsSwap Instructions: Start with Scarlett Red At layer #38 (1.64mm) swap to White for the rest.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
