MakerWorld
3D Printer Accessories
Ver Modelo
Housing A1 Mini
149
Descargas
133
Likes
29
Makes
This Box is nearly airtight and you will not hear any sound from your A1 mini! Sadly you cannot use AMS if you put the printer inside. After some hours of printing I can easily reach temperatures of 40°C + inside with a humidity of Open the door if you print PLA!You need to print 8 Corner Parts, 12 Side Parts, 4 Corner Parts for the Seal and 4 Side Parts for the seal. I also inlcuded a Filament holder and some brakets to keep the door shut or open, as well as a Filament Storage. The print can be printed on the A1 mini itself in 2 days of printing time and needs 2,5kg of Filament.You will need to buy (besides 2.5kg of Filament):6 wooden Panels 500x500x12 (Amazon Link DE)Acrylic glass 400x400x3 (Amazon Link DE)6 Soundproofing foams 500x500x3 (Amazon Link DE [three of these])Wooden Sticks as Connectors (Amazon Link DE)Sealing Tape 6x3 (Amazon Link DE)Door hinges (Amazon Link DE)Wooden ScrewsPlastic Glue For the Filament Holder:M8x120 screw + Nut2 Standard Bearrings (<a target="_blank" hre
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!