Housing for Raspberry Pi ZERO PHAT DAC

Case for Raspberry Pi Zero W made in 3mm acrylic to contain the pHat DAC of Pimorini.

It has a button to turn off the Raspberry Pi that must be connected to pin 5 (for example) and to ground. If you use the Volumio player, you can load the plugin to control the shutdown when you press the button. If you do not want to use the off button, simply delete the 6 x 6 mm square in the SVG file on the side piece that corresponds to the camera connector.

I have used a push button of this type: https://piol.in/2gbTOqm with measures of 6 x 6 x 5 mm.

To hold the housing and separate the RPi and the DAC I have used 8 M3 x 12 nylon screws, 4 nylon M3 nuts, 4 M3 x 12 spacers and another 4 M3 x 6 spacers.

I include the RPiZeriDAC-new.lyz file that can be used directly on LaserDRW with the K40 Laser.

If you find my design interesting, you could make a small donation: https://www.paypal.me/fbuenonet