Thingiverse
Hovership MHQ2
door sb_88
20
Downloads
9
Likes
0
Makes
- Updated the MHQ2 parts by increasing the plate thickness by 2mm to increase the body stiffness.
- Increased the height of landing gear to place a 4S battery at the bottom (still working on it!)
- No change in arms
Here's the first flight video link: https://www.youtube.com/watch?v=KGaU51msiHU
The vibration dampers I ordered from Hovership were too small for the plates because of the added thickness, so there's quite a lot of vibration in the quadcopter while flight. Ordered some bigger dampers which hopefully should resolve the issue.
** Update - 12/13/2015 **
- Added FPV gear, didn't fly the quad yet as still waiting for the vibration dampers.
- Increased the height of landing gear to place a 4S battery at the bottom (still working on it!)
- No change in arms
Here's the first flight video link: https://www.youtube.com/watch?v=KGaU51msiHU
The vibration dampers I ordered from Hovership were too small for the plates because of the added thickness, so there's quite a lot of vibration in the quadcopter while flight. Ordered some bigger dampers which hopefully should resolve the issue.
** Update - 12/13/2015 **
- Added FPV gear, didn't fly the quad yet as still waiting for the vibration dampers.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
