Thingiverse
HPE PSU pack
by phillpoc272
0
Downloads
0
Likes
0
Makes
DANGER contains mains and high voltage capacitors that can keep a charger after turned off and unplugged
combine 3 hpe power supplies together for a really powerful psu.
live power come in psu 1 and goes to switch from switch it goes back into each pus and was soldered to the pcb. neutrals and grounds go between each. top xt60 is 36v unless you do voltage mod (not recommended) and bottom is 12v off the first psu. each psu is isolated from the metal chassis with 3d printed standoffs that replace the original ones, they are best removed using a punch and hammer on top of a hole.
combine 3 hpe power supplies together for a really powerful psu.
live power come in psu 1 and goes to switch from switch it goes back into each pus and was soldered to the pcb. neutrals and grounds go between each. top xt60 is 36v unless you do voltage mod (not recommended) and bottom is 12v off the first psu. each psu is isolated from the metal chassis with 3d printed standoffs that replace the original ones, they are best removed using a punch and hammer on top of a hole.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!