Thingiverse
HTC Vive Quick Adjusting Stock
door GornNR
21
Downloads
18
Likes
0
Makes
See labeled image for components. Extensions may need to be shimmed for a tight fit.
Only non-plastic/printed parts are the Springs and O-Rings. O-Rings are used for quickly inserting and holding the controllers. Springs are used for the adjustment mechanisms.
Adjustments can be made without needing to remove the headset.
O-Rings; 2 x "130" or "30" - OD:1.750" ID:1.625" T:0.0625" & 2 x "129" or "29" - OD:1.625" ID: 1.500" T:0.0625"
Springs; 8 x "G2 Pilot Gel Roller Pen Springs" UPC: 072838310576
Alternative ODMax:0.240" IDMin:0.160" MinCompLength:0.310" MaxL:0.490"
Use 1.75mm filament to pin components in place.
Only non-plastic/printed parts are the Springs and O-Rings. O-Rings are used for quickly inserting and holding the controllers. Springs are used for the adjustment mechanisms.
Adjustments can be made without needing to remove the headset.
O-Rings; 2 x "130" or "30" - OD:1.750" ID:1.625" T:0.0625" & 2 x "129" or "29" - OD:1.625" ID: 1.500" T:0.0625"
Springs; 8 x "G2 Pilot Gel Roller Pen Springs" UPC: 072838310576
Alternative ODMax:0.240" IDMin:0.160" MinCompLength:0.310" MaxL:0.490"
Use 1.75mm filament to pin components in place.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!