Hub Bub Odd (2017 Science Olympiad)

The Hub Bub Odd is a very simple Wind Power wind turbine for the 2017 division C Science Olympiad, based on the original [Hub Bub](http://www.thingiverse.com/thing:1271884). It should be fully rules complaint but check dimensions before using this design.

The Hub Bub Odd is an easy to attach hub that allows 1/8" wooden dowels to be used to attach fins to the CD. Unlike the original Hub Bub, the Hub Bub Odd is based on sets of three fins and not four. The Hub Bub Odd comes in two flavors, a three (3) and a six (6) fin configuration. Note that you will need a printer able to print thing fairly dimensionally accurate or you will spend a lot of time either gluing or sanding the dowels.

The dowels should be firm while in place but still removable. Helpful note, glue to the 'shiny' side of the CD.

Design Project: Project Apollo

====================================================================

Printed Parts needed:

1x Hub Bub Odd - Three
-or-
1x Hub Bub Odd - Six

===