Hueforge - ALIEN 200x200

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to BambuLab Green At layer #12 (1.04mm) swap to Blue Gray At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest.