Hueforge Alien Zombie

Project: HFAlien150.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x150mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.1mm and the Actual Depth is 2.1mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Silver Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Jade White At layer #14 (1.2mm) swap to Silver At layer #16 (1.36mm) swap to Red WARNING: This Slider is at the same Layer as the Next Slider At layer #25 (2.08mm) swap to Jade White for the rest.