Hueforge America First

by Luckyfer · Hueforge & Lithophane

19 Downloads

28 Likes

14 Makes

Project: America First.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Generic PLA Black Transmission Distance: 2.2 PLA esFIL PLA 850 Red Transmission Distance: 6 PLA esFIL PLA 850 Electric Blue Transmission Distance: 5 PLA Winkle PLA HD Blanco Glaciar Transmission Distance: 2This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Electric Blue At layer #19 (1.6mm) swap to Blanco Glaciar for the rest.