Hueforge-American Flag & Eagle

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Beige At layer #19 (1.6mm) swap to White for the rest.