Hueforge Aperitif Place

Hueforge Place de l'apéro Boost MeBoost me please :p;dMembershipThank you for supporting me in my work. Project: Place de l'apéro.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 235x155.17mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.6mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA eSun Blue Transmission Distance: 4 PLA Sunlu White Transmission Distance: 7This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Blue At layer #15 (1.28mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!