Hueforge - Ashoka

Hueforge - Ashoka---------------------------------------------------------------------------------------------------------Become a Patreon Free Member and vote for upcoming models …www.patreon.com/thereallagnor69--------------------------------------------------------------------------------------------------------- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA Bambulab Basic Black Transmission Distance: 0.3 PLA Bambulab Basic Blue Gray Transmission Distance: 3 PLA Bambulab Basic Grey Transmission Distance: 1 PLA Bambulab Basic Sky Blue Transmission Distance: 2.6 PLA Bambulab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Note for AMS: Set the Color White, to the same slot were your Black is inserted.On Layer 11, there is a manuell BREAK inserted. Swap the bl