Slicer Discord
HueForge Bald Eagle – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

HueForge Bald Eagle

40 Downloads
28 Likes
11 Makes
Go to Model
This picture of a Bald Eagle was made using HueForge. It requires 5 colors Black, Dark Gray, Light Gray, Light Brown, and White. I used all Matte colors for this print because the colors seem to blend well together. Matte also helps reduce stringing on the print, but you can use normal PLA if that is all you have. Please keep in mind depending on the brand and shade of your PLA your results may vary. Print at 100% infill with a layer height of 0.08, the first layer needs to be 0.16, and a wall loop of 1.I did not use a prime tower, it is not needed. This print should take about 4h5m if you use the 3mf settings. Swap Instruction are as followed: Start with BlackAt layer #7 (0.64mm) swap to Dark GrayAt layer #13 (1.04mm) swap to Light GrayAt layer #16 (1.36mm) swap to Light BrownAt layer #18 (1.52mm) swap to White Happy Printing! Note: If you only have one AMS you can still print this. This is how you do 5 colors on one AMS. You put the color changes in the side bar where you can see the
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
5 colors
Single piece 5 colors / AMS
Supports 1/3
Assembly 0/3
Settings 3/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Colors
5 (AMS/MMU recommended)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

4 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection