Hueforge Bear

The Model is 112.09x200mm in size.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm This print uses 4 unique filaments #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #91202b PLA+HS eSun Fire Engine Red Transmission Distance: 6 #8a9298 PLA BambuLab Basic Gray Transmission Distance: 1.8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Fire Engine Red At layer #13 (1.12mm) swap to Gray At layer #16 (1.36mm) swap to Jade White At layer #27 (2.24mm) swap to Gray for the rest.