Hueforge Beer&Grill

Hueforge Beer&GrillBoost MeBoost Me PleAse :p:dProject: beer&grill.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x179.67mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA Sunlu/Jayo Black Matte Transmission Distance: 0.1 PLA Sunlu + Green Transmission Distance: 3 PLA Bambu Basic Bronze Transmission Distance: 0.6 PLA Sunlu Red Transmission Distance: 3.5 PLA eSun Yellow Transmission Distance: 4.9 PLA Sunlu Matte White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions: Start with Black Matte At layer #7 (0.64mm) swap to Green At layer #11 (0.96mm) swap to Bronze At layer #15 (1.28mm) swap to Red At layer #20 (1.68mm) swap to Yellow At layer #24 (2mm) swap to White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.Non-commercial !!!