Hueforge Cécémel

Hueforge CécémelBoost MeBoost me please :p:dMembershipThank you for supporting me in my work.Project: Cecemel.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160.6x240mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.88mm and the Actual Thickness is 2.88mm Filaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #4c3801 PLA Bambu Basic Bronze Transmission Distance: 0.6 #0000ab PLA eSun Blue Transmission Distance: 4 #cc0000 PLA BambuLab Basic Red Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.5 #a6a9aa PLA BambuLab Basic Silver Transmission Distance: 0.5 #ffffff PLA Sunlu White Transmission Distance: 7This print uses 7 unique filaments Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Bronze At layer #9 (0.8mm) swap to Blue At layer #14 (1.2mm) swap to Red At layer #21 (1.76mm) swap to Yellow At layer #2