Hueforge Choso

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 92.2x199.52mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Black Transmission Distance: 0.6 PLA Gray Transmission Distance: 3 PLA Red Transmission Distance: 6.2This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to At layer #15 (1.28mm) swap to for the rest.