Slicer Discord
HueForge Commander Cards – 3D-Druckmodell von MakerWorld MakerWorld
Other Art Models

HueForge Commander Cards

17 Downloads
8 Likes
10 Makes
Zum Modell
A Commander Card insert which fits perfectly into the front slot of the commander deck box I created. This is an optional insert, but makes the deck box stand out from the other bland deck boxes by integrating some hue forge prints. Here are the print settings for the color changes For Groot Card (Phylath, Word Sculptor)Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 66x91.32mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.5mm and the Actual Depth is 1.5mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #8 (0.72mm) swap to Blue Gray At layer #9 (0.8mm) swap to Jade White for the rest. For Atraxa CardPrint at 100%
Kategorie
Other Art Models
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
50 mm (Klein)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen