Hueforge Dama de la Escalera

Project: Dama de la escalera.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 133.61x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA PolyLite Pro Metallic Gold Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #15 (1.28mm) swap to Metallic Gold At layer #20 (1.68mm) swap to White for the rest.