Hueforge Dave Grohl

Only use 4 filament.You can print it with AMS or notIn this case, add a pause at every new colorPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x195.96mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Marine Blue At layer #13 (1.12mm) swap to Gray At layer #14 (1.2mm) swap to Jade White for the rest.