HueForge Deer - Stag

A small HueForge model of a deer with a mountain in the background. Instructions:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 70.31x125mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.4mm and the Actual Depth is 1.4mmFilaments Used: PETG GEEETECH BLACK Transmission Distance: 0.5 PETG GEETECH White Transmission Distance: 8.9This print uses 2 unique filamentsSwap Instructions: Start with BLACKBorder Only Colors from here until the end. At layer #6 (0.56mm) swap to White for the rest.