Hueforge Dientes, dientes, ques lo que les ode

Project: Dientes, dientes.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 126.17x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA PolyLite Grey Transmission Distance: 1PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Blue GrayAt layer #14 (1.2mm) swap to GreyAt layer #19 (1.6mm) swap to White for the rest.