HueForge Dobermann

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with BlackAt layer #7 (0.64mm) swap to RedAt layer #8 (0.72mm) swap to OrangeAt layer #9 (0.8mm) swap to Jade White for the rest.