HUEFORGE DONT TREAD

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #000000 PLA BambuLab Basic Black Transmission Distance: 1.5 #fb0a09 PLA Creality Hyper Red Transmission Distance: 3.7 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 3.6 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #15 (1.28mm) swap to Turquoise At layer #19 (1.6mm) swap to Black At layer #21 (1.76mm) swap to Red At layer #24 (2mm) swap to Black At layer #26 (2.16mm) swap to Yellow At layer #31 (2.56mm) swap to White