Hueforge Doraemon Javier

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.16x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smatfil rojo Transmission Distance: 2.3 PLA smatfil amarillo Transmission Distance: 5.8 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #7 (0.64mm) swap to rojo At layer #10 (0.88mm) swap to amarillo At layer #14 (1.2mm) swap to White for the rest.