Hueforge Dragon Ball

Project: 1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.3mmFilaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA PolyLite Wine Red Transmission Distance: 1 PLA Overture Yellow Transmission Distance: 9.7 PLA Kexcelled White Transmission Distance: 4This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Orange At layer #15 (1.28mm) swap to Black At layer #16 (1.36mm) swap to Wine Red At layer #18 (1.52mm) swap to Yellow At layer #23 (1.92mm) swap to White At layer #28 (2.32mm) swap to Black for the rest.