Hueforge - Dune Part Two

Thank you for checking out my HueForge! Please leave Like and Share! Boost MeBoosts are always appreciated :)Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x138.06mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #24 (2mm) swap to Jade White for the rest.