Hueforge Eagle Skull 2.0

Project: aguila calavera 2.0.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 89.69x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA BambuLab Basic Blue Gray Transmission Distance: 1 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA Smart Recycled Coral White Transmission Distance: 6.4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #10 (0.88mm) swap to Ash Gray At layer #13 (1.12mm) swap to Coral White for the rest.