Slicer Discord
HueForge Eevee [Multicolor] – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

HueForge Eevee [Multicolor]

26 Downloads
16 Likes
1 Makes
Go to Model
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!*** Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Earth Brown Transmission Distance: 0.3 PLA PolyLite Pink Transmission Distance: 3 PLA PolyTerra Army Beige Transmission Distance: 0.5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5 Swap Instructions: Start with Black At layer #22 (1.84mm) swap to Earth Brown At layer #45 (3.68mm) swap to Pink At layer #50 (4.08mm) swap to Army Beige At layer #51 (4.16mm) swap to Beige At layer #56 (4.56mm) swap to White for the rest.
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
2 colors
Single piece 2 colors / AMS
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Colors
2 (AMS/MMU recommended)
Post-processing
Painting
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection