Hueforge Evoli V2 Eevee

by lofofora002 · Hueforge & Lithophane

7 Downloads

8 Likes

4 Makes

Project: evoli v2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.3 PLA BambuLab Basic Beige Transmission Distance: 1This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to Cocoa Brown At layer #25 (2.08mm) swap to Beige for the rest.