Hueforge F35

Printed with an AMS and put in a pause at layer 21 for switching the black for white.When slicing and sending to printer set White as Black. For manual swaping filament, use the settings below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x159.94mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.3 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Sunny Orange Transmission Distance: 10 PLA+ Sunlu Pure Yellow Transmission Distance: 4 PLA+ Sunlu White Transmission Distance: 2This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #14 (1.2mm) swap to Sunny Orange At layer #20 (1.68mm) swap to Pure Yellow At layer #23 (1.92mm) swap to White for the rest.