Hueforge Giraffe

Hueforge Giraffe Pop ArtI used Bambu Basic Black, Orange, Yellow and Jade WhiteFile is set at 200mm x 200mm but can be changed, do not change the height (Z axis). Colors can be changed to suit your needs. Check out my bio for info on commercial rights. The files cannot be sold, shared or transferred in any way ever. Project: giraffe blk org yel wht.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 2.4mm and the Actual Depth is 2.5mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #15 (1.28mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #24 (2mm) swap to Jade White for the rest.