Hueforge Godzilla

Project: Godzilla Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mmFilaments Used: #111113 PLA Copymaster 3D Black Transmission Distance: 0.5 #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #15 (1.28mm) swap to Cyan At layer #16 (1.36mm) swap to Ivory White for the rest.